======================
2004-03-16 / build 511
======================
- Fixed a bug in the Issue Edit View. When the selected view were the HTML Editview, 
  and you tried saving an issue, you might became an Automation failed error and 
  NewsMerge crashed. This error has been fixed now. 

======================
2004-01-30 / build 510
======================
- Fixed the 2xMailCheck Click Bug. When using the ms access database, it could happen 
  that the subscription emails were not send during the same check, 
  but in the next Mailcheck. This has been fixed now, the subscription emails will
  be processed within the same check now. 

======================
2004-01-19 / build 508
======================
- Fixed a bug in the POP3 Fetching engine. Emails with a longer subject then 100 characters
  caused an -2147217887 ADO Error. This has been fixed now, subjects longer then 100 
  characters are truncated now.

======================
2003-09-10 / build 507
======================
- Fixed two bugs in the POP3 Fetching engine. Some emails can contain seldom special characters. These characters caused error's like "invalid pattern string" when new emails were received NewsMerge.
- Minor other bugfixes

======================
2003-05-19 / build 485
======================
- New Postmaster Undelivery messages are detected now.
- New field for subscribers, htmlmail. If set to true, recipient can read html email. If false, recipient will receive plain text emails.
- Subscription notifications can now have all replacement strings liek in the Issue Edit view
- Minor other bugfixes

======================
2003-05-19 / build 484
======================
- Fixed a bug in the Email Import function for Outlook. 
  With some Outlook Version, the email addresses were trunscated at the beginning. 

======================
2003-02-20 / build 479
======================
- Improved speed of Subscription listening. 
- Added Save function into Issue Edit View
- Fixed a bug when sending out issues (Error 0)
- Minor other stability fixes

======================
2003-02-20 / build 472
======================
- Fixed several bugs in the HTML Editor
- Fixed minor other bugs within NewsMerge

======================
2002-05-02 / build 403
======================
- The New Issue View has now an option to filter the issues by newsletter.
  It can also be configured if an issue should be send as Plain text, html or both.
- Fixed some minor bugs in the new Issue Edit View.

======================
2002-04-29 / build 397
======================
- New Issue View implemented as well as a new powerfull HTML Editor.
  The new HTML editor has alot of possibilites to edit and design html newsletters 
  as well as plain text newletter. You can import a website from a URL for example and much more...
- Added option to forward Email messages that NewsMerge can not handle.
- Fixed some bugs in the SQL Server database handling
- All NewsMerge settings are now saved per User. That means that two different users can have 
  different profiles, a different database to work with.
- minor bugfixes.

======================
2002-04-25 / build 368
======================
- Changed Version to 2.0 (To much new features ;-)
- Enhanced support for Importing CSV Files
- Add possibility to choose the database location (For example a network share)
- Added support for MS SQL Server (Attention, please contact Adiscon Support before using 
  this new powerful feature!)
- Improved Speed of the Subscriber listening in the Manage View of the Subscriptions 
  (Was very slow when 5000 or more subscribers are in the database)
- Fixed bug with Email Subscription messages that where send over AOL (AOL Email Application)
- New manual in HTMLHelp format, so you don't need third party application.
- Added Counter into the Subscribers Manage View (So you see how much subscribers are in the 
  current Newsletter)
- changed the basic license concept of NewsMerge. NewsMerge has no a 30 days trial 
  period where all features are enabled. After this period, 
  it turns into the Freeversion which has some limitations. 
  NewsMerge can now licensed in two ways, there is a "Home Edition" and a "Professional" Version. 
  The "Home Edition" has all features instead of the possibility to use MS SQL Server 
  (Which of course is only available in the 30 Trial period and in teh Professional Version).
- Customers with a registered version of NewsMerge 1.x and with Upgrade Insurance please contact 
  sales@adiscon.com. The old license key is not valid for this NewsMerge, so you wil 
  need a new license key.

======================
2002-04-19 / build 336
======================
- Added a better detail view into the Mail Message Archive.
- Added Import Support for Textfiles (CSV Format)
- Fixed some minor bugs

======================
2002-04-15 / build 314
======================
- Disabled MessageBox Windows in POP3 Check Window if Logging Level is not set to debug. 
  This will prevent the error message window from being displayed (And blocking NewsMerge) if 
  automatic mailcheck is enabled.

======================
2002-04-12 / build 313
======================
- New features added. YOu can now import existing Email Addresses either 
  from MS Outlook or from MS Outlook Express.
- Added Detailview into Mailcheck Window which catches all important messages.
  This is very helpful to view what is going on during the whole mail check process.
- Added Detialview into the Publish Issues Window which catches all important 
  messages during publishing.
- Fixed a bug that occured if automatically Mailcheck was enabled and the Option Window opened.
- NewsMerge Notification Icon can now be enabled or disabled during runtime.
- Improved handling in the Issue Window, if a new Issue is added.
- The database can now be compressed over the menu entry 
  "Maintenance->Compress Database" during runtime. 
- Added Detail View into the Eventlog Window. This makes it very helpfull to see the whole event 
  messages and to copy them into the Clibboard.
- The state of the "Ingore Error's" option in the Publishing Window i snow be saved.
  So you don't need to click it everytime again and again.
- Fixed a bug when the Installer did not write necessary registry values for the DatabaseLocation.
- minor bugfixes...

======================
2002-02-22 / build 252
======================
- Removed a bug (Run-time error 91) that occurred if NewsMerge processed an email without a subject. 

======================
2002-02-01 / build 248
======================
- Removed a bug that occurred if an empty subscriber was added using the 
details tab of the Subscribers view.

======================
2002-02-01 / build 245
======================
- Added workarround for the "Multiple-step OLE DB operation generated errors. 
Check each OLE DB status value, if available. No work was done." error that 
occurs under MDAC 2.5 and Microsoft Jet 3.51.

======================
2001-11-18 / build 168
======================
- removed a bug that could lead to errors if invalid subscription
  email addresses were used (POP3 Check)
- added a "publish now" button to issues - makes publishing much
  easier (this is not very well tested - errors might occur if you
  use this functionality)

======================
2001-11-12 / build 165
======================
- instrumented the version with OutputDebugStrings to aid fixing
  a hard lifed POP3Check bug
- dbwin32.exe included to view these messages (see HowToViewDebugMessage.txt
  for how to operate it)
- added the capability to display additional information in the mass
  subscribe / unsubscribe (please note: the tab order is messed up. Will
  be fixed later)

======================
2001-11-05 / build 161
======================
- Added addional error handling into the POP3 Checking
- Removed some minor bugs that occured during POP3 Checking

======================
2001-11-04 / build 150
======================
- corrected the tab order on some dialogs

======================
2001-11-03 / build 148
======================
- worked around a bug in Microsoft Data Access Components (this bug
  preventd POP3 check to work on some machines)
- increased compatibility to free public formmail script by adding
  new mail commands to management mail
- Custom fields are now also supported in the subscriber grid view

======================
2001-10-24 / build 144
======================
- support for Microsoft Windows XP themes added
- moved the GUI more toward the 1.3 final release --> resizing etc for new elements does work.
  done lots of work in this area
- improved internal publishing speed (but typically the ISP link is the bottleneck...)
- fixed a bug that caused the issuelist and details to become out of sync after publishing
- fixed a bug that caused the stringlist window to remain on screen if NewsMerge was set to
  run in the background, these Window was open and the user clicked the oprating system close
  control in the top right system area (the "X").
- auto word break in Newsletter Details subscribe and unsubscribe text boxes
- changed default setting - "run in background" is now turned off after installation

======================
2001-10-20 / build 141
======================
- German localization added (updated message file)

======================
2001-10-12 / build 141
======================

- auto subscribe and unsubscribe do now also work with the popular formmail script
  found at many providers - must be proved in praxis

======================
2001-10-08 / build 137
======================

- support for age, birthday (just in db) and custom fields, age is -1 if not in DB
- fix for HTML mail subscribe/unsubscribe
- subscription management enhancements -> manual "mass action" possible now
  subscribed and unsubscribed members available via two multi select listboxes;
  members can easily be moved between the boxes.
- cations fixed
- please note: script engine handles conditional expressions (not documented yet, see sample below)

====This is a valid sample newsletter:
<% = GreetingLine %>
This is a test.
Lastname: <% = LastName %>
<% if FirstName == "" then %>YOUR FirstNAme TEXT IF EMPTY<% else %>YOUR FirstNAme TEXT IF NOT EMPTY<% endif %>
<% if LastName == "" then %>YOUR TEXT IF EMPTY<% else %>YOUR TEXT IF NOT EMPTY<% endif %>

<% if Age > 30 then %>... this is just for the older folks among us ;-)<% endif %>
Age: <% = Age %>
CustomField1: <% = CustomField1 %>
CustomField2:<% = CustomField2 %>
CustomField3: <% = CustomField3 %>
<% if CustomField2 == "" then %>CustomField2 leer'!!<%endif%>
====END SAMPLE